Before we can discuss how to invent the next big thing about energy production we need to look at some facts first. facts about induction heating, peltier effect: Beating to make a magnet: If you have a ferromagnet, specially iron you can make it a temporary magnet by beating it with a hammer. The domains can be aligned by beating. Firstly, if your ferromagnetic metal, iron/nickel is a flat stick it's better but long cylinders should work too. Place the stick so one end is facing magnetic north pole and another is to south pole. Make sure no other magnets is near the stick. Then hit the stick with a hammer gently, take 5 minutes. It's better if the hammer is made out of steel but other materials should work too. Within minutes it should become a temporary magnet, meaning if you place a compass near it, it may disrupt it. or if you place a powerful magnet within 1 meter, then the stick's north pole may push away the north pole of the magnet.

Induction heating and eddy current: In case you don't know what the hell is electricity and induction, let's try to first explain induction heating this in one line- if you create a coil with high frequency A.C current, then in the middle you place a cast iron or ferromagnetic metal like nickel or cobalt, then the metal will get heat. This called cold hot plate. Your pot will get 150C+ really fast but the coil is relatively cold... slightly above room temperature. Don't try this at home but you may even be able to place a newspaper on the coil and place a pot full of water turning into steam just above it. This is because there is eddy current that has a skin effect, The current goes, or more correctly oscillates through the sides of the pot to heat it up. So the shape of the pot also plays a vital factor. Many pots and kettles nowadays have induction friendly metal attached to the bottom you will see if you go to the market. So note that- the flammable things you see around you, in induction heating those are not gonna start burning, most newspaper won't burn. However ferromagnetic metal like iron will catch fire instantly(if the eddy current is high). Copper or some other metals are diamagnetic(aluminium paramagnetic). They don't heat up if you place them top of the coil. This is not heat transfer, this is current transfer(wirelessly) to a ferromagnetic object. More correctly transferring current just under the surface of the object, so too much electricity oscillates in small spaces and heating it up. This is like forcing a resonance in small spaces.

Nikola Tesla's induction motor: Why did Nikola Tesla loved copper though? That is because of another reason. Go test if you can attach a magnet to a copper plate, you can't. Copper is diamagnetic and aluminum is slightly paramagnetic. However, If you have several magnets say four magnets on a wood and each one of them are placed at 90 degrees of other. Then you will need piece of copper plate and place it above these magnets. The copper needs to keep a little bit of distance from the magnets say 2 centimeters. Then spin the magnets, the copper plate will start spinning too.

You want to build induction motor like Tesla?. Copper, even though it's not magnetic, it gets dragged by a magnetic field. Nikola Tesla didn't use permanent magnet though, he used 2 phase electromagnet to move the magnetic field and the copper plate. He coiled the wires up to become an electromagnet in the induction motor. But you can do it in the opposite way too. Wind turbines work like this- copper spins, that creates the magnetic field and you get the electricity. Congratulations you just built an induction motor. Induction motor has certain advantages over other motors, induction does not require permanent magnets and they are more responsive to changes.

Thermoelectric device: Peltier devices are thermoelectric devices where you attach two different types of metals together. Then if one metal of these combined conductor has higher temperate than the other metal, then you end up having a voltage. For a small peltier device it's usually 5 volts(0.2 amp so basically 1 watt or less) for 30 to 40 degree Celsius temperature difference. It's not really efficient as heat pump by itself.

coils: Coils are simple only if you understand fields. Multiple coils can step up voltages in transformers. When you electrify a coil, electric field gets 'distorted' or combined, which way you want to put it. This electric fields form a bar magnet. Magnetic south pole is at the positive end and north pole is negative. That's how you create a temporary magnet with only electricity Go search for Faraday cage, Van de graaffe generator and Tesla Coil Wireless.

Bifilar coil: Some Nikola Tesla supporters talk about bifilar coil and radiant energy. Bifilar coil is unintuitive and mysterious but there is no proof that it generates electricity so this is becoming an opinion and not fact.

Magnets and special theory of relativity: Magnets work because of special theory of relativity. If there is a flow of electron in the wire, then the speed makes electron contract length. because of special theory of Einstein's relativity- speed-> length contraction in the same dimension, mass expansion and time dilation. This length contraction causes more charges to dense together and these charges form a magnet to repel/attract other charges . General theory of relativity: Special theory of relativity has no acceleration. And we know certain things are not ferromagnet, they are paramagnet and diamagnet. Most things have magnetic properties even water, oxygen, many sulphate salts even. Copper spins, create a magnetic field. Why? That is because general theory of relativity which takes account of acceleration.

Electron doesn't flow: Electron never flows from the power station to your house. in DC electron's flow so slow you can't even measure it, and forget about DC, in AC electrons never flow they just oscillates really fast. What flows is current. Current is a wave. Electron oscillation/movement creates a current. These are images of a longitudinal wave: http://www.acs.psu.edu/drussell/Demos/waves/Lwave-v8.gif

Energy flow and dimensional collapse: What is the energy flow of the current? Energy flows from the outside of the wire, more correctly, it flows from the surface, remains outside of the metal wire until it reaches the resistor/device then it converges at the surface of the device. The higher the wattage the 'more outside' the energy is. I know what you are thinking, what boogaloo is this? Energy doesn't flow inside the metal wire like an electron flow, it is flowing on the surface or even more outside? Well it's true and it's not only theoretical. It happens in real life. Search for Heaviside telegram cables USA. Heaviside and other scientists fixed this cross product calculation 120 years ago when USA screwed up a telegram cable in the Atlantic, because of using too much iron casing. When a current flows through a wire, it creates a electrical field. It also creates a magnetic field which is circling around the wire. Poynting vector is cross product of electric and magnetic field. So right hand rule applies-> the energy is flowing from the surface of the wire. The energy does not go through the metal. Note that current obviously goes through the metal. Electron stays in same position/oscillates to create a CURRENT. Current goes through the metal wire to create and ENERGY FLOW. Energy flows on the surface of the wire.

Piezo electricity: Piezoelectricity is or was mostly fringe science. But scientists can't explain earthquake lights and many other things about the earth which happens mostly because of carbon crystals. So some geologist are researching piezoelectric light beams, glowing orbs or sparks, these things often appear minutes before an earthquake, specially when the earthquake is near the coast or a lake.

semi-fact: Can't call Fleishmann-Pons Cold Fusion experiment a fact because it was not he most repeatable in the world but it's a semi-fact.

Now opinions: Isn't it amazing our civilization doesn't know much about electricity. I mean if you go to the particle physicists they all know that energy flows on the surface of the wire. But if you go ask a peasant, or even if you go ask a physicist who is doing his/her masters they probably won't know anything about heaviside, they still think energy flows through inside of the metal.

Why does the current flow in the wire create energy flow that stays outside the wire? That is because of the double helix. Universe is a vertigo where your spirit, your resonance is the pulse. When current wave flows through the metal it creates a double helix outside the wire. This helix is the energy wave. Instead of a longitudinal wave this wave is a spiral which is spinning, kinda like a transverse wave, but more 'helixy', if that is a word. It's a vertigo.

Note that energy is just a dimensional collapse. Energy is Force dot product Displacement. What is displacement we are talking about here? An object with mass moved from one place to another place after some time. So with reference to time you are changing one dimension(or multiple dimension) of the object. This is a dimensional collapse. If you look from time dimension, then you won't see the energy, you will gain another spatial dimension so you will see a spatial 4th dimension line from point A to point B. You can't really imagine it because upper dimensions have probabilities with it.

(LASER experts gonna hate me because actually in quantum mechanics Power is the one which causes dimensional collapse, among other fun stuff like negative temperatures etc. power has a time derivation... but this will have to do for now)

Mainstream physicists are being elitists in many ways. They won't accept chemists like Fleishmann discovering cold fusion. Because physicists have their string theory where they have to spend 20B euros before 2035. The issue is, mainstream physics won't discover the next big energy source because physics is there to point at the direction from macro level. Math gives us structure, physicists set macro level direction, but chemists and maybe even biochemists or quantum biologists have to find the right chemistry to discover radically new things. Now the issue is physicists are often helped by BP Oil and won't listen the chemists. They will suppress quantum biologists, will scream human brain is not capable of quantum mechanics because it's too big and wet, even though quantum biologists are saying opposite things.

Cold Fusion Fleishmann research was depending on the surface of the palladium. This is distantly connected to eddy current and surface waves. Eddy current itself is 'mysterious'. Well it's not mysterious but in many metals the 'eddy current' and skin effect are closely related to heat, magnetic effect and even sound, rather than only being related to electricity. In a way, we are trying to find solitons. Solitary waves are the 'zero point' vacuum energy/perpetual energy flow. Things have to resonate in a way that creates a soliton like a tsunami and we get the energy out of it.

As Michael Tellinger put it- Moving sound is magnetism, moving magnetism is electricity. Everything comes from sound first, then has magnetic properties and then sends a signal in the spectrum of light. Beating up to align domains of a metal? That's just Michael Tellinger.

Dimensional collapse of electricity- Note that electron doesn't flow. It's the current that is flowing. And we are also saying that current flow creating a magnet because of length contraction? Why? Why does current flow create the supposed length contraction of the electrons and create magnetic effect? The magnet should be created by flow of electron, which doesn't 'flow'.

This is because electron's wave pattern. Electron or any tiny particles have wave-particle duality. When you are sending electricity, in the atomic level electrons are waving outside the nucleus, their wave pattern changes. This change of wave creates the current. In a way, dimension is collapsing, but not for the reason you think. It's not too many electrons getting in a smaller dimension and repelling charges. It's electron changing their behavior causing current to flow and repelling charges. There is a reason why physicists know quarks and leptons but won't know how atoms form, spending billions to the physicists not gonna solve the problem. The problem will have to be handled by the chemists. Maybe earth scientists will contribute(Chan Thomas said so). Maybe the earth has some atomic behavior. Or how about the theologians? Cycle of catastrophism?

Interferometry and my idea of cold fusion: My idea of cold fusion, is focusing more on vertigo. Interferometry, which Hutchison and Tom Bearden were said to be expert at, needs to combine multiple ideas about electrodynamics and Nikola Tesla. So, eddy current- peltier devices, coil..... hmm

We need to make something like a bifilar coil but not so boring. It needs to be like a double helix like DNA. Two sides have to be from two different types of metal to create peltier effects. Maybe one side bismuth because bismuth is strongly diamagnetic. Then spin the double helix on top of an induction heating to generate unequal heat. If one side it lot more hotter than other that creates a voltage. Maybe even put some piezo electric crystals in between two metals so electricity passes across the different metals but heat doesn't dissipate fast. Put the thing near water.

In short- cold fusion fleishmann is inconsistent. We need to make Fleishmann-Pons consistent, by combining multiple ideas regarding Nikola Tesla and electricity. You might be angry as this doesn't sound repeatable. But that's the thing about interferometry, or at least that's what John Hutchison said. There is no one formula that is discovered, maybe military and blackops have discovered a formula. But for peasants, peasants have to try out things in order to create a soliton among the metal.

If anybody actually gets an over unity a.k.a. free energy device working, don't try to get a patent or commercialize it. It's a trap. Michael Tellinger and other electric universe theorists are warning you about this trap. You should publish documents and diagrams of your over-unity device. Get an underground community to build the devices to produce energy in home and small factories first. If you want to go big you will be bought out by military projects, or even worse get assassinated.

Steven Greer is possibly a a deep state agent now working in military tech. People associated with Colonel Tom Bearden are also big oil lobbyists.

For researching fringe science related to Nikola Tesla and energy weapons- Michael Tellinger https://www.youtube.com/watch?v=XZLv2WT84CI&t=8006s Dr Judy Wood https://www.youtube.com/watch?v=vadSaWyiozg&t=2