Logical fallacies since Fig5 comment ruins all theory.
Ignition of propellant at each floor level pushes the perimeter columns outward and create reactionary force into the core columns and out through opposite side.
( Fuck all that imbeciles who post text as images! Burn in hell, bastards! )
Combustion of flowing out fuel in raw atmosphere does not create significant pressure, and definitely does not create pressure large enough to somehow push the walls of building. You need detonation for that or hermetically sealed volume. In the worst case it could push out windows glass, but it is impossible to damage steel columns.
Thermal expansion also will not work as described, since everything will expand, including inner core. In reality, with high probablility center column will be hotter than floor plate, so center column widened from heat will tightly fix cooler floor plate on itself. You could pour some gas/alcohol on your palm and set it on fire. You will need some time to sense the heat from fire on your palm. So, fire on the floor will not cause bearings fault, on the opposite, it will likely make the fixture tighter.
Also, it is a concrete plate. reinforsment bars in it and beams, are not separate independent sticks like on the pictures, they are connected by reinforced concrete, so beams will not behave like they are on their own, separate and independent things. It is a concrete plate reinforced with steel bars welded to the beams. Like giant square steel reinforced concrete washer on the square column with a ledges. Even if somehow plate will be disconnected from center colummn, plate will not bend to the center, like on pictures it will tend to fall as one piece. Try to bend a center on a regular washer fron hardware store.
Even if the plate will fall, it will not fall staying horisontally. It is not free fall, It will inevitably tilt on one side and stuck dead on the center coliumn With high probability first loose floor plate hardly even will be able to fall to the lower floor plate, most probably it will hang tilted right after the nearly impossible all bearings fault. On that principle, when some plate with center hole tilts and stuck deadly on the beam passing through center hole, many mechanisms build, like carpenter bar clamps or that gun-like things to push the glue or sealer from tube cartridge.
To make such collapse that was observed happen in structure desribed, you need somehow destroy center column to allow floor plates fall free on each other as there is nothing in the center.
Either this WTC buildings was build from just loose unconnected sticks, either described process of the destruction is impossible.
Logical fallacies since Fig5 comment ruins all theory.
( Fuck all that imbeciles who post text as images! Burn in hell, bastards! )
Combustion of flowing out fuel in raw atmosphere does not create significant pressure, and definitely does not create pressure large enough to somehow push the walls of building. You need detonation for that or hermetically sealed volume. In the worst case it could push out windows glass, but it is impossible to damage steel columns.
Thermal expansion also will not work as described, since everything will expand, including inner core. In reality, with high probablility center column will be hotter than floor plate, so center column widened from heat will tightly fix cooler floor plate on itself. You could pour some gas/alcohol on your palm and set it on fire. You will need some time to sense the heat from fire on your palm. So, fire on the floor will not cause bearings fault, on the opposite, it will likely make the fixture tighter.
Also, it is a concrete plate. reinforsment bars in it and beams, are not separate independent sticks like on the pictures, they are connected by reinforced concrete, so beams will not behave like they are on their own, separate and independent things. It is a concrete plate reinforced with steel bars welded to the beams. Like giant square steel reinforced concrete washer on the square column with a ledges. Even if somehow plate will be disconnected from center colummn, plate will not bend to the center, like on pictures it will tend to fall as one piece. Try to bend a center on a regular washer fron hardware store.
Even if the plate will fall, it will not fall staying horisontally. It is not free fall, It will inevitably tilt on one side and stuck dead on the center coliumn With high probability first loose floor plate hardly even will be able to fall to the lower floor plate, most probably it will hang tilted right after the nearly impossible all bearings fault. On that principle, when some plate with center hole tilts and stuck deadly on the beam passing through center hole, many mechanisms build, like carpenter bar clamps or that gun-like things to push the glue or sealer from tube cartridge.
To make such collapse that was observed happen in structure desribed, you need somehow destroy center column to allow floor plates fall free on each other as there is nothing in the center.
Either this WTC buildings was build from just loose unconnected sticks, either described process of the destruction is impossible.